3-pointed HSSE Co5 metal drill bit DIN338 , ProfiLine Vision , PTG
Variant:
2,0mm |
In stock
(4x)
|
4,68 € with VAT |
2,1mm |
On request
|
4,68 € with VAT |
2,2mm |
On request
|
4,68 € with VAT |
2,3mm |
On request
|
4,68 € with VAT |
2,4mm |
On request
|
4,68 € with VAT |
2,5mm |
On request
|
4,68 € with VAT |
2,6mm |
In stock
(1x)
|
4,68 € with VAT |
2,7mm |
On request
|
4,68 € with VAT |
2,8mm |
On request
|
4,68 € with VAT |
2,9mm |
On request
|
4,68 € with VAT |
3,0mm |
In stock
(2x)
|
2,80 € with VAT |
3,1mm |
On request
|
3,15 € with VAT |
3,2mm |
On request
|
3,15 € with VAT |
3,3mm |
In stock
(9x)
|
3,15 € with VAT |
3,4mm |
On request
|
3,73 € with VAT |
3,5mm |
On request
|
3,73 € with VAT |
3,6mm |
On request
|
3,73 € with VAT |
3,7mm |
On request
|
3,73 € with VAT |
3,8mm |
On request
|
3,73 € with VAT |
3,9mm |
On request
|
3,73 € with VAT |
4,0mm |
In stock
(2x)
|
3,73 € with VAT |
4,1mm |
On request
|
3,96 € with VAT |
4,2mm |
In stock
(1x)
|
3,96 € with VAT |
4,3mm |
On request
|
4,25 € with VAT |
4,4mm |
On request
|
4,25 € with VAT |
4,5mm |
On request
|
4,25 € with VAT |
4,6mm |
On request
|
4,49 € with VAT |
4,7mm |
On request
|
4,89 € with VAT |
4,8mm |
On request
|
4,89 € with VAT |
4,9mm |
On request
|
4,89 € with VAT |
5,0mm |
In stock
(2x)
|
4,89 € with VAT |
5,1mm |
On request
|
5,53 € with VAT |
5,2mm |
On request
|
5,53 € with VAT |
5,3mm |
On request
|
5,53 € with VAT |
5,4mm |
On request
|
5,53 € with VAT |
5,5mm |
In stock
(5x)
|
5,53 € with VAT |
5,6mm |
On request
|
6,17 € with VAT |
5,7mm |
On request
|
6,17 € with VAT |
5,8mm |
On request
|
6,17 € with VAT |
5,9mm |
On request
|
6,17 € with VAT |
6,0mm |
In stock
(9x)
|
6,17 € with VAT |
6,5mm |
In stock
(5x)
|
7,04 € with VAT |
6,8mm |
In stock
(2x)
|
8,14 € with VAT |
7,0mm |
On request
|
8,14 € with VAT |
7,5mm |
On request
|
8,91 € with VAT |
8,0mm |
In stock
(1x)
|
10,01 € with VAT |
8,5mm |
In stock
(2x)
|
11,58 € with VAT |
9,0mm |
On request
|
13,03 € with VAT |
9,5mm |
On request
|
14,08 € with VAT |
10,0mm |
In stock
(2x)
|
15,83 € with VAT |
10,5mm |
On request
|
17,45 € with VAT |
11,0mm |
In stock
(1x)
|
19,67 € with VAT |
11,5mm |
On request
|
21,01 € with VAT |
12,0mm |
In stock
(1x)
|
23,85 € with VAT |
12,5mm |
On request
|
24,78 € with VAT |
13,0mm |
On request
|
26,41 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- PTG
- Warranty:
- 24 months
Product information
3-edged right-cut ground spiral cobalt drill bit for steel and
stainless steel with cylindrical shank
Diameter: according to the selected variant
Drill length: Short series - see attached photo for lengths
Material: HSSE - High speed steel + Co5 / HSSCo5
Standard: DIN338 (replaces PN 2907 / PN2907)
Usage :
Stand and column drills, NC and CNC machines, possibly also hand drills.
Structural steel
Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2
Stainless steel
Wrought aluminum alloys and other aluminum alloys
Advantages :
Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved.
Thanks to three blades, the feed can be increased by up to 60%.
The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes.
The drill does not jam when re-drilling an existing hole.
The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
Diameter: according to the selected variant
Drill length: Short series - see attached photo for lengths
Material: HSSE - High speed steel + Co5 / HSSCo5
Standard: DIN338 (replaces PN 2907 / PN2907)
Usage :
Stand and column drills, NC and CNC machines, possibly also hand drills.
Structural steel
Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2
Stainless steel
Wrought aluminum alloys and other aluminum alloys
Advantages :
Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved.
Thanks to three blades, the feed can be increased by up to 60%.
The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes.
The drill does not jam when re-drilling an existing hole.
The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
Variants
How do customers see us?
"vše bez problému a rychle"
"vše v pořádku, rychlé dodání a slušná cena"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!